Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
gdevelop5:all-features:p2p [2020/08/03 14:43]
4ian
gdevelop5:all-features:p2p [2020/12/26 13:56] (current)
Line 1: Line 1:
 # Peer-to-peer # Peer-to-peer
  
-<note important>This is an experimental feature, it is potentially subject to change and may contain bugs. Your feedback is welcome to improve this feature.</note>+<note important>This is an experimental feature, it is subject to change and may contain bugs. Your feedback is welcome to improve this feature.</note>
  
 GDevelop supports peer-to-peer (P2P) connections to enable basic multiplayer games. This works through the concept of *remote events*.  Connect multiple instances of the game using their **ID**, before remotely triggering conditions on the other instances. GDevelop supports peer-to-peer (P2P) connections to enable basic multiplayer games. This works through the concept of *remote events*.  Connect multiple instances of the game using their **ID**, before remotely triggering conditions on the other instances.
  
-<note warning>This extension is not suitable for all types of multiplayer games and is potentially unsafe against cheating. As every instance of the game is connected directly to each other, there is no machine that can be considered trusted more than anothor. As such, it is hard to verify if someone is cheating (unlike dedicated servers). P2P supports a maximum of 250 simultaneous connections, and is therefore also not suited for very large multiplayer-focused games like MMOs.</note>  +<note warning>This extension is not suitable for all types of multiplayer games and is potentially unsafe against cheating. As every instance of the game is connected directly to each other, there is no machine that can be considered trusted more than anothor.  
 + 
 +As such, it is hard to verify if someone is cheating (unlike dedicated servers). P2P supports a maximum of 250 simultaneous connections, and is therefore also not suited for very large multiplayer-focused games like MMOs.</note>  
  
 ## Selecting a broker server ## Selecting a broker server
  
-Before being able to send data, a running game, called a "client", must connect to other clients. For this, it needs a way to self identify and find other clients. To do so we need a broker server. It's a server with a fixed, well-known address that stores all the adresses of the connected clients and give them to the clients, so that they can connect to each other. You have two options here:  +running game, called a **client**, must connect to other clients before being able to send data. For this, it needs a way to self-identify and find other clients. To do so a **broker server** must be configured. It's a server with a fixed, well-known address that stores all the addresses of the connected clients and give them to each client, so that they can connect to each other. 
  
-* Setting up your own server (recommended) +There are two options for setting up a broker server:  
-* Using default, public server.+
  
-####  Set up your own server+  * Setting up a custom server (recommended), which can be run on a local computer as a test. 
 +  * Using a default, public server.
  
-You can set up your own server easily. You will need to [install Node.js](https://nodejs.org/en/download/). The LTS version is recommended.+####  Set up a custom (localserver
  
-Open a command line. To do so on Windows, you can press the Windows and r keys, then type `cmd` in the popup, and enter.+A local server can be set up easily.  [install Node.js](https://nodejs.org/en/download/) will need to be installed. The LTS version is recommended.
  
-In the command line, type the first time only (to install the server) `npm install peer -g` +Open a command line. To do so on Windows: 
-Thenwhenever you want to start the server, just type in a command line `peerjs --port <the port>`.  +  - Press the **Windows** and **R** keys. This will open the **run** window 
-I will use the port 9000 through the article, but you can use any that is not already used by your machine+  - Type **cmd** in the popup. 
-You can pass other options to the PeerJS server, see [it'website](https://github.com/peers/peerjs-server) for more informations.   +  - Press the **enter** key. 
-You can the use the "Use custom broker server actionto connect to your server. You can enter localhost as host to point directly to your own address  + 
-<note tip>Note that this is a local server, so it will only work on your machine. When releasing your game you will need to deploy one to a hosting website like heroku.</note>  +After opening a command line, complete the following: 
 +  - If this is the first time completing these steps, to install the server type **npm install peer -g** 
 +  - After the server is installedand every subsequent time (to start the server), type **peerjs -<the port>** 
 +     *  Any port that is not already used by the computer can be used.  
 +Other options can be passed to the PeerJS server, see [its website](https://github.com/peers/peerjs-server#config--cli-options) for more information.   
 +After the above has been completed, the **Use custom broker server** action is used to connect to the server.  
 +  *  **localhost** can be used as the host address to point to the local server. 
 + 
 +<note tip>Note that this is a local server, so it will only work on your machine. When releasing your game you will need to deploy one to a Node.js compatible hostinglike Heroku.</note>  
  
 ####  Use the default server ####  Use the default server
  
-<note important>It is not recommended to use that server, you should use your own if possible. The default server is not operated by GDevelop and GDevelop is not responsible if anything goes wrong using that server.</note>+<note important>It is not recommended to use that server, you should use your own if possible. The default server is not operated by GDevelop and GDevelop team is not responsible if anything goes wrong using that server.</note> 
 You can also use the default server provided by PeerJS. You can also use the default server provided by PeerJS.
-To use that server use the action "Use default server".  +To use that server use the action "Use the default server".  
  
 ## Connecting ## Connecting
Line 37: Line 48:
 To connect instances, you need to enter their ID in the other instances. The ID can be found with the expression `P2P::GetID()`. To connect, use the "Connect to other instance" action and pass as parameter the ID of another instance. Both instances will then connect automatically. You can then send an event from one instance to the other one to make sure that the connection is established.   To connect instances, you need to enter their ID in the other instances. The ID can be found with the expression `P2P::GetID()`. To connect, use the "Connect to other instance" action and pass as parameter the ID of another instance. Both instances will then connect automatically. You can then send an event from one instance to the other one to make sure that the connection is established.  
  
-## Interracting with connected games+## Interacting with connected games 
 + 
 +Once you got connected, you can trigger actions remotely. You can select another specific game instance (using its id) or send an event to all connected instances. 
 + 
 +### Choosing if you want to activate data loss mode 
 + 
 +You might be wondering what the "data loss" parameter is for.  
 +Due to how GDevelop is made, only one occurence of a remote event can be handled when the event sheet is executed (this happens roughly 60 times per second). To help optimize events execution, we provide the choice to use the dataloss mode.  
 + 
 +* With the *no dataloss* mode, every remote event is queued, and on every frame if there is one in the queue, we take the oldest one and handle it. **This makes sure every data is processed/taken into account.** 
 +* With the *dataloss mode* activated, it doesn't queue the data but only store the latest occurence of the remote event. **This means only the latest data is processed and outdated data will be discarded.** 
  
-Once you got connected, you can trigger actions remotely. You can select a specific other game instance (by it's id) or send an event to all   
  
-#### Data loss+Here are two examples: 
  
-You might be wondering what the data loss is for. Who would want to lose data right? Well it has to do with data handling. Due to how GDevelop is made, only one occurence of a remote event can be handled by execution of the event sheet. So to help optimize events execution we provide the dataloss mode. On the //no dataloss// mode, every remote event is queued, and on every frame if there is one in the queue, we take the oldest one and handle it. **This makes sure every data is processed/taken into account.** The //dataloss mode// doesn't queue the data but only reminds the latest occurence of the remote event. ** This means only the latest data is processed and outdated one might be ignored.** As an example, if you use a synchronised score counter, you don't want to lose any data, as missing only one point of the counter would //desynchronize// the counters, so the dataloss mode would be deactivated. If you want to synchronize positions tho, only the last position sent is relevant, not older positions, so you would activate the dataloss mode //to prevent delays/lag//.+* if you use a synchronised score counter, you don't want to lose any data, as missing only one point of the counter would *desynchronise* the counters, so the dataloss mode would be deactivated.  
 +If you want to synchronise positions, only the last position sent is relevant, not older positions. In this case, you would activate the dataloss mode *to prevent delays/lags*.